ValueRAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM use gold contact fingers.

Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP = 2.5V Typical

VDDSPD = 2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

Low-power auto self refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Dual-rank

On-board I2 serial presence-detect (SPD) EEPROM

16 internal banks; 4 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

PCB: Height 1.18” (30.00mm)

RoHS Compliant and Halogen-Free

Product DescriptionKingston 16GB, DDR4, 2666MHz (PC4-21300), CL19 SODIMM MemorySeriesKingston ValueRAMDDR TypeSODIMM DDR4Size1 x 16GBSpeed2666 MHzCompliancePC4-21300Pins260-pinCAS Latency19-19-19Data Integrity CheckNon-ECCVoltage1.2VAdditional InformationSee OverviewPackage TypeRetailPackage Weight0.0225 kgWarrantyLifetime