The NZXT H510 Elite is a successor to the H500i. This Midi-Tower offers, like its predecessors, an attractive and minimalist design. NZXT has installed a Smart Device V2 to allow for control over fans and RGB-LED accessories, while giving the front panel a refresh with new ports. This time however, not only does the left side panel come in tempered glass, but the whole front of the H510 Elite as well.
THE FEATURES OF THE NZXT H510 ELITE MIDI-TOWERS AT A GLANCE:
Minimalist case from NZXT in black
Integrated fan- and RGB-LED controller
Two Aer RGB 2-fans pre-installed
Large tempered glass front section and side window
Includes two addressable NZXT HUE 2 RGB-LED strips
Space for a 280 mm radiator in the front
Bays for up to three 2.5"- and three 3.5" drives
Vertical GPU mounting compatible
NZXT H510 ELITE MIDI-TOWER: PERFECT FOR MODDING!
NZXT has opted for the tried-and-tested shape of its predecessors in the H510 Elite, complete with smooth and sleek surfaces all in perfect proportion to one another. What is new however, is the transparent tinted and tempered glass front section of the case, through which users will be able to enjoy the sight of two RGB-LED fans shining away. The other special feature on offer in the NZXT H510 Elite Midi-Tower lies in its integrated NZXT CAM-supporting controller, known as the Smart Device V2. It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips, which users can then admire through the tempered glass side window.
The three PWM connectors can be split with Y-cables to connect up to nine fans in total. The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans. An acoustic sensor helps to maintain the optimal balance between cooling and noise. Control is of course possible via the feature-rich software on PC.
OPTIONS FOR AIR- AND WATER COOLING
Those who prefer to opt for traditional air cooling will find that the NZXT H510 Elite has plenty to offer: with two in the front and either a 120- or 140 mm fan in the roof, and with space for a 120mm in the back, there's plenty of options. For CPU coolers, there is a maximum of 165 mm height available. NZXT equips the Midi-Tower as standard with two in-house custom Aer RGB 2-series fans. Bith 140 mm fans can be admired through the tempered glass front of the case. The fans are controlled via PWM signal and are supplied with plenty of fresh air. The sides and bottom of the front, as well as under the power supply, come with removable dust filters.
NZXT even took into consideration a wide range of custom water cooling options: in the front, users can install a 280- or 240mm radiator. The rear of the case supports a 120 mm radiator. The thickness of both radiators is limited to a maximum of 60 mm. The cable cover between the motherboard and the front of the case allows reservoirs and pumps with a height of up to 180 mm to be installed.
ABUNDANT SPACE FOR HARDWARE
The interior of the NZXT H510 Elite offers space for the installation of a range of high-end hardware: Mini-ITX, Micro-ATX and ATX motherboards can all be installed in the Midi-Tower. For expansion cards, the case offers seven slots. Additionally, the H510 Elite offers two additional slots to enable the vertical mounting of graphics cards. The graphics card is limited to up to 381 mm in length.
As was the case with its predecessors, the NZXT H510 Elite does not offer external drive support. Internally however, users are free to install a large number of drives if needed: beneath the PSU shroud lies a hard drive cage. This enables users to install up to three 3.5" hard drives.
Behind the motherboard tray, two 2.5" drives can be mounted vertically. Another 2.5" drive can be installed on the PSU shroud. This means that up to three 3.5" drives- and three 2.5" drives are possible. Behind the motherboard tray, users will find dedicated rails for cable guidance. There are between 19 and 23 mm of space available to help stow away unsightly cables.
Dimensions without feet: 210 x 435 x 428 mm (W x H x D)
Dimensions with feet: 210 x 460 x 428 mm (W x H x D)
Material: Steel, tempered glass
Weight: 7.5 kg
Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fans:
2x 120 mm or 2x 140 mm (front)
1x 120 mm (rear)
1x 120 or 1x 140 mm (roof)
2x 140 mm NZXT Aer RGB 2 (500 - 1500 RPM, 61.63 - 154.93 m³/h, 22 - 33 dB(A), front)
1x AER F120 (rear)
Filter: Front, bottom
1x 280 or 1x 240 mm (front)
1x 120 mm (rear)
3x 3.5" (internal)
3x 2,5" (internal)
PSU: 1x Standard ATX (optional)
Expansion slots: 7 + 2 (vertical)
1x USB 3.0 (USB 3.1 Gen 1, internal connection)
1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection)
1x 3.5 mm jack (4-pin, TRRS, Audio-In/Out)
Smart Device V2
3x 4-Pin PWM (max. 10 W per channel)
2x 4-Pin RGB (NZXT HUE 2, proprietary)
1x USB 2.0 (9-Pin, internal)
Max CPU cooler height: 165 mm
Max GPU length: 381 mm
Max radiator size:
Front: 60 mm
Rear: 60 mm
1x NZXT H510 Elite
1x Set mounting screws
10x Cable binders
1x Headset adapter (1x 3.5 mm 4-pin to 2x 3.5 mm 3-pin)
Manufacturer's guarantee: 2 Years
Choose how fast you receive your order with the multiple delivery methods we have to offer.Learn about our delivery options
Our main focus is to provide the best customer service possible to our community.We're here for you
Every time you make a purchase at shop4megastore.com we give you 2.5% of the price you paid back in Reward PointsSee even more reasons
For 15 years we have been working our hardest to ensure that our customers and suppliers can trust us.Learn more about us
Want to know when NZXT H510 Elite Midi Tower RGB Gaming Case - Black Tempered Glass drops below a certain price? Enter your email address and price below and we'll let you know when it drops below that price!
Why over half a million customers stay with us...
Please note that this address is not for correspondence or product returns. If you would like to contact us, please use the form on the contact page.