The Silenos Pro from Raijintek represents a premium, virtually transparent, Midi-Tower design that diverges from Raijintek's previous efforts in spectacular form. Visually, the Silenos Pro manages to impress with its use of hardened glass, which covers the entire front of the case as well as the side windows. Additionally, the Silenos Pro comes equipped with two pre-installed 200 mm RGB-LED fans on the front as well as another 120 mm LED fan on the back of the unit. The case also manages to provide plenty of space for powerful gaming hardware and all the water-cooling solutions you care to think mention.
THE RAIJINTEK SILENOS PRO MIDI-TOWER AT A GLANCE:
Premium and stylish Midi-Tower in black
Large tempered glass panels in the front and on both sides
Plenty of space for air- or water-cooling gear
2x 200 mm- and 1x 120 mm fan with RGB lighting pre-installed
Space for 360- or 280 mm radiators on the front or in the roof
Space for motherboards up to ATX in form factor
2x 3.5" or 6x 2.5" storage devices
CPU coolers with a max height of 166 mm
Graphics cards up to 320 mm long
DESIGNER TEMPERED GLASS SIDE WINDOWS IN THE RAIJINTEK SILENOS PRO MIDI-TOWER
The Raijintek Silenos Pro makes no bones about its intentions to be the perfect case for a heavy-duty gaming setup, while also looking the part to boot. Raijintek opted for a premium and robust 0.6 mm-thick steel chassis with a black paint finish. The case also includes two large tempered glass side windows that allow an unobstructed panorama-style view of the interior, and all the high-end hardware you choose to install. Even the front of the case is equipped with a tempered glass pane, the glass panels certainly pack a punch, making it very clear that this case is about offering the best looks and showing off your hardware at its best.
AIR- OR WATER COOLING IN THE RAIJINTEK SILENOS PRO
For active airflow, Raijintek has included a pre-installed 120 mm fan, which is then supported by the addition of two further (huge) 200mm fans in the front. This means your hardware will benefit from excellent airflow, reliably cooling even the hottest hardware. All three pre-installed fans include ring-shaped RGB lighting with dRGB-LEDs to round out the overall look. If necessary however, the Midi-Tower does offer enough space to expand the air cooling system to up to a total of six 120 mm fans or four 140 mm fans. Two of these 120- or 140 mm fans can be attached to the roof. Above them lies a honeycomb mesh as well as a magnetic dust filter.
Thanks to the relatively large dimensions of the Midi-Tower case, it also makes a great candidate for anyone considering some high-end water-cooling gear. The front of the case supports a radiator up to 360 mm or 280 mm in size, while the roof has enough space to support either a 280- or 240 mm radiator. The Silenos Pro has also benefited from Raijintek's decision to include a range of choices for when it comes to installing new drives. A modular HDD cage beneath the PSU shroud allows for two 3.5"- or two 2.5" drives. A 2.5" drive can also be attached to the reverse side of the motherboard tray, and two more on the front. Finally, the PSU shroud offers support for three more 2.5" drives.
SMART DESIGN AND PLENTY OF SPACE FOR GAMING HARDWARE
The interior of the 7.8 kg Raijintek Silenos Pro proves itself to be pleasantly spacious, because in addition to the ATX, Micro-ATX, or Mini-ITX motherboard, the case also supports high-end power supplies, GPUs up to 32 cm long and CPU coolers up to 16.6 cm tall. What is especially useful and appreciated is the increased amount of space located behind the motherboard tray for the sake of easier cable management. Raijintek has certainly succeeded in setting a high bar when it comes to usability as well, for example, the dust filters are also easy to remove and clean - meaning that your system will operate cooler for longer without the unnecessary ingress of dust and other debris.
Moreover, the Silenos Pro comes equipped with motherboard spacers and a large cut-out in the motherboard tray to make swapping coolers far more convenient than previously. The I/O panel in the front section of the roof of the case includes two USB 2.0 ports, one USB 3.0 Type A connector and one HD audio connector. The integrated controller for the digitally addressable RGB lighting of the fans can accommodate a total of six RGB components with standard 5VDG pins, and this is controlled by means of a switch on the I/O pane. Alternatively, the RGB lighting can be connected and controlled using an appropriately equipped motherboard.
Dimensions: 270 x 500 x 465 mm (W x H x D)
Weight: approx. 7.8 kg
Material: Steel, tempered glass, plastic
Form factor: ATX, Micro-ATX, Mini-ITX
Total fans compatible:
3x 120 mm, 2x 140 mm or 2x 200 mm (front)
2x 120 mm or 2x 140 mm (roof)
1x 120 mm (rear)
2x 200 mm (front)
1x 120 mm (rear)
1x 240 / 280 / 360 mm (front)
1x 240 / 280 mm (roof)
1x 120 mm (rear)
Filter: Roof, bottom
2x 3.5/ 2.5" (internal) + 6x 2.5" (internal)
Power supply: 1x Standard ATX
Expansion slots: 7
1x USB 3.0 Type A, 2x USB 2.0
1x Audio In
1x Audio Out
1x RGB-LED controller
1x Reset switch
1x Power switch
Max GPU length: 320 mm
Max CPU cooler height: 166 mm
Choose how fast you receive your order with the multiple delivery methods we have to offer.Learn about our delivery options
Our main focus is to provide the best customer service possible to our community.We're here for you
Every time you make a purchase at shop4megastore.com we give you 2.5% of the price you paid back in Reward PointsSee even more reasons
For 15 years we have been working our hardest to ensure that our customers and suppliers can trust us.Learn more about us
Want to know when Raijintek Silenos Pro ARGB Mid-Tower Gaming Case - Black Tempered Glass drops below a certain price? Enter your email address and price below and we'll let you know when it drops below that price!
Why over half a million customers stay with us...
Please note that this address is not for correspondence or product returns. If you would like to contact us, please use the form on the contact page.