The Zalman S4 Plus is a budget friendly midi tower case with enough space for all your components. Aesthetically the case is excellent with an acrylic glass side panel to display the components such as the two pre-installed 120mm RGB fans. It has a solid construction in an eye-catching brushed aluminium.

THE ZALMAN S4 PLUS MIDI TOWER AT A GLANCE:

Simple elegant design

Tinted side panel made of acrylic glass

Two pre-installed 120mm RGB fans

Mesh front panel for optimal airflow

Fully featured I/O panel with 1x USB 2.0, 1x USB 3.0 and audio jack

Room for graphics cards up to 315mm long and CPU coolers up to 160mm in height

Space for up to a 240mm radiator or two 120mm radiators

THE ZALMAN S4 PLUS CASE IN DETAIL:

The Zalman S4 Plus's attractive exterior is complemented by clever details on the inside. For instance a power supply shroud creates a neat and tidy look and can hold a power supply up to 180mm long. There are also good options for cable management. Cables can run behind the motherboard or through the six recesses.

In respect to cooling, two 120mm RGB fan are pre-installed in the front and another one is on the back. Two additional 120mm fans can be attached to the cover and above the PSU shroud. If you prefer water cooling, a 240-millimeter radiator can be attached to the front. Removable dust filters on the base and top ensure good airflow, which is enhanced by the mesh front panel.

There is space for up to two 3.5-inch hard drives or one 2.5-inch SSD in an HDD cage behind the power supply. Another SSD can be installed behind the motherboard tray. GPUs up to 315mm in length can be accommodated if no fan is fitted to the front. Finally the I/O panel is equipped with a USB 3.0 and a USB 2.0 port.

All in all then the Z4 the ideal foundation for a well-equipped gaming system.

SPECIFICATION:

Dimensions: 206 x 458 x 400 mm (W x H x D)

Material: steel, plastic, acrylic glass

Weight: approx. 3.7 kg

Colour: black, gray

Form factor: ATX, Micro-ATX, Mini-ITX

Total fans possible:

3x 120 mm (front)

2x 120 mm (lid)

2x 120 mm (top of power supply cover)

1x 120 mm (back)

Pre-installed:

2x 120 mm (front)

1x 120 mm (back)

radiator Mountings:

1x max. 240 mm (front)

1x max. 120 mm (back)

Dust filter (removable): bottom, lid

Drive Bays:

2x 3.5 / 2.5 inch (internal)

1x 2.5 inch (internal)

Power supply (optional): Standard ATX

Expansion slots: 7

I / O panel:

1x USB 3.0

1x USB 2.0

1x per audio in / out

Maximum graphics card length:315 mm (without front fan)

Maximum power supply length: 180 mm

Maximum height of CPU cooler: 160 mm